New copper cooler with vertical channels in the PCF(c) method of construction, additionally the channels were milled in 90°angle, for an efficient heat transfer. The copper surface has been glass beaded, in order to increase the cooling surface. The cooler possesses a patented nozzle device with return channels for accelerated warm water transfer. The flow resistance has been reduced up to 30%, perfect for systems with G1/4" connections and 10mm hoses, as the cooler incorporates hose cross-sections.
In order to use the advantage of a complete metal cooler to full capacity, high-temperature o-seal rings were introduced, which can survive maximal temperatures of up to 200°Celsius - a further safety factor, in the event of fault.
Further mechanical advantages result from central surface pressure of the middle bolt and the trouble-free installation, with no need of removing the mainboard.
The bearing area of this cooler is flat and polished. The cover is polished, cover and nozzle device are nickel-plated. The G1/4" (BSPT 1/4”) screw threads are adapted for all connecting systems. Due to the enclosed mounting, there is no need to remove your mainboard.
Specifications:
Dimensions:
(L x W x H)
50 x 50 x 17mm
Weight:
(water block)
330g (approx.)
Weight:
(mounting hardware):
40g (approx.)
Material:
Copper base and copper nickel plated top
Mounting:
Socket 754/939/940/FX/Opteron & middle screw
Fittings:
(cooler is supplied without fittings)
G1/4” (BSPT 1/4") 8/10mm
Note: All Alphacool water blocks are shipped with a protective foil over the bottom of the heat sink. This must be removed before mounting the block.
view cart | terms | shipping
